SCRAPER FILL INTERIOR
A superior interior environmentally friendly, interior only, multi-purpose, ready-mixed filler that dries to a matt finish. Developed as a scraper coat for plastered walls to fill in surface imperfections prior to painting. Can be sanded easily once fully dried. No priming needed if the Scraperfill has been properly preped (surfaces wiped with damp cloth).
Recommended For
INTERIOR surfaces.
Used as a hairline crack filler, or as a scraper coat over cement plaster (eliminating the need for filling). Also suitable for skimming over defects in plasterwork, for
skimming after alterations or renovations to marry new and old surfaces, and for skimming over correct prepared pre-painted surfaces to provide an even surface.
Not Recommended For
Not suitable for EXTERIOR use.
All cracks >0.5mm must be prepared in the recommended manner. Scraper Fill Interior may not cover them effectively.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Mix well then apply using a steel trowel, scraper or spackle tool. Scraper Fill Interior will shrink back slightly in deep holes and imperfections. These areas will need a
second application. Sand when dry (minimum of 4 hours after application depending on thickness). 100 grit or finer sandpaper is recommended.
After sanding Scraper Fill Interior it is essential that all the loose powder and dust from sanding is wiped off. Ensure the surface is free of any contamination before
painting commences. Provided all the sanding dust is fully wiped off and the surface is free of any contamination, then a primer is not necessarily required. However,
priming is preferred. However, as a safeguard a suitable primer is generally recommended before applying finishing coats.
Spread Rates
On reasonable plaster ±1m²/kg as a skim coat and 2m²/kg as a scraper coat.
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
