RUST NEUTRALIZER
A blend of phosphoric acid, anti-corrosive pigments, and surfactants formulated to react with light surface rust and chemically remove rust from mild steel prior to painting. Rinse of with clean water when heavy foaming has stopped.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used to remove light surface rust and passivate the surface of iron and steel, therefore preventing flash rusting prior to priming.
Not Recommended For
Not suitable for masonry and wood surfaces or areas of heavy rust.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Supplied ready for use – do not dilute. Apply by brush and work well into the surface. Allow the chemical reaction to finish. i.e. when all noticeable foaming stops, before
rinsing down with clean water. Allow to dry fully and apply your first coat of primer.
Spread Rates
15 - 20m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
