WB MASONRY SEALER
An environmentally friendly, high grade, water-based masonry primer which is highly alkali resistant and provides an excellent base for subsequent emulsion coatings. Can be used interior or exterior.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used as a primer on all masonry, plaster and concrete surfaces. Good adhesion has also been achieved on gypsum surfaces, however due to the varying and difficult
nature of the substrate we recommend a trial be conducted before use. To achieve best adhesion the drying time should be extended to 48 hours
Not Recommended For
Not suitable for use on metal, wood or floors.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Thoroughly stir and apply 1 coat of WB Masonry Sealer to correctly prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to dry before
overcoating.
Spread Rates
±8m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
