PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation contact your closest Paintsmiths store. PRIMING Apply one coat of Earthcote DTE Matt, tinted to your chosen Earthcote Worn Leather colour, using a Hamiltons 225mm Polypile roller and a Hamiltons 50mm Utility brush (for cutting in) at a spread rate of ± 7m²/litre. Allow to dry for 4 hours before overcoating. COATING Apply two coats of Earthcote Worn Leather using a Hamiltons 150mm Fibreglass brush using crisscross strokes working it to stretch the product as far as possible at a spread rate of ± 8m²/litre. Allow 4 hours drying time between coats. IMPORTANT: Always keep a wet edge and avoid downing tools during the application process to prevent lap marks and variances i n colour or texture. Work from corner to corner, or from a natural cut off point to another. For the same reason, do not attempt to patch this coating. SEALING Apply two coats of Earthcote Wall Wax with a lint-free mutton cloth or buffing machine with lambswool pad, working from corner to corner at a spread rate of ± 40m² per 2lt tin. The more coats of Earthcote Wall Wax applied, the more lustrous and rich the coating will be. NOTE: Earthcote Wall Wax is purely a decorative finish and offers limited sealing properties. Midas Colour Retaining Primer or Midas Water-based Twin Pack Acrithane should be used to seal in the more trafficable areas. Please refer to the relevant product data sheets for more detailed information on application.