MIDAMITE COARSE W&T
An intermediate exterior textured coating. Must be overcoated with Midas Midalux 230/240.
Recommended For
EXTERIOR surfaces.
Used on new or previously painted surfaces. The coating covers hairline cracks and fine surface imperfections. This product must be overcoated with Midas Midalux
230 / 240.
Not Recommended For
Not suitable as a top coat or primer.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your closest Paintsmiths store.
After the correct surface preparation has been completed apply one coat of Earthcote Coarse Aggregate using a brush or roller at a spread rate of 4m²/litre and allow to
dry.
Then thoroughly stir and apply one coat of Midas Midamite Coarse to prepared surfaces using a brush or roller at the stipulated spread rates. Allow to dry before
overcoating.
IMPORTANT: Overcoat with two coats of Midas Midalux 230 / 240 at the recommended spread rates, allowing drying time between coats.
• NEW WORK RECOMMENDATION: Prime first with Midas Masonry Primer.
Spread Rates
± 1m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
