PLASTER PRIMER WHITE
An economical, solvent-based Styrene Acrylic Co-polymer designed to offer good penetration to most cementitious substrates. It binds the surface to give a solid base for most decorative finishing coats. Interior and exterior use.
Recommended For
INTERIOR and EXTERIOR surfaces.
Suitable as a primer for all plastered and gypsum surfaces.
Not Recommended For
Not suitable for areas of high humidity and in close proximity to the sea.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Thoroughly stir and apply 1 coat of Plaster Primer White to prepared surface using a brush or roller at the stipulated spread rates. Allow to dry before overcoating.
Spread Rates
±7m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
