WB INTERIOR PLASTER PRIMER
An environmentally friendly, economical, water-based plaster primer which is moderately alkali resistant and provides a suitable base for subsequent emulsion coatings onto one or two coat plaster. Interior use only
Recommended For
INTERIOR only.
Used as a primer on masonry, plaster and concrete surfaces. Good adhesion has also been achieved on gypsum surfaces, however due to the varying and
difficult nature of the substrate we recommend a trial be conducted before use.
Not Recommended For
Not suitable for use on metal wood or floors.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface
preparation, contact your nearest Paintsmiths store.
Thoroughly stir and apply one coat of Midas WB Interior Plaster Primer to correctly prepared surfaces using a brush, roller or spray at the stipulated spread
rates. Allow to dry before overcoating.
Spread Rates
±8m2
/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on th e condition and porosity of
the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
