Natureplast Medium Render
An environmentally friendly medium pitted, scratch-textured coating, applied in a random or striated pattern. The product is trowel-applied by trained skilled applicators.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used on suitably prepared surfaces such as plaster, cement, bricks, composite boards, etc.
Suitable for binding and sealing of chalked and powdery surfaces to create key adhesion for textured coatings.
Not Recommended For
Decorative plaster should not be applied to horizontal surfaces.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
It is recommended that this product be applied by a skilled applicator.
Primer
Apply one coat of Earthcote Natureplast Textured Acrylic Primer, tinted to chosen colour, using a roller. Allow to dry before overcoating.
Textured coating
Apply one coat of Earthcote Natureplast Render of required grade, using a clean steel trowel, and then pattern with a plastic trowel.
Glaze
To reduce dirt retention and for an attractive sheen finish, apply 1 coat Earthcote Colour Retaining Primer using a brush or roller.
Spread Rates
Textured Acrylic Primer: 5 - 6m²/litre
Natureplast Fine Render: 2kg/m²
Natureplast Medium Render: 2.5kg/m²
Natureplast Coarse Render: 3.2kg/m²
Natureplast Suede Render: 2.5 – 3kg/m²
Glaze: 7 - 8m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
