Natureplast Textured Acrylic Primer White
A textured water based primer for use on a number of substrates prior to applying one of the Midas Natureplast Render. It has excellent obliteration properties to ensure that the substrate is evenly covered.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used on suitably prepared surfaces such as plaster, cement, bricks, composite boards, etc.
Suitable for binding and sealing of chalked and powdery surfaces to create key adhesion for textured coatings.
Not Recommended For
Do not apply directly onto fresh/uncured masonry surfaces.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
After correct surface preparation, stir thoroughly and apply one even coat by brush and/or roller at the specified spread rate. Ensure that the surface is properly
obliterated. Allow to dry before overcoating with the final finishing product.
New cement plaster must be allowed to dry completely, one week drying time for every 5mm thickness. This time will be increased during cold or wet weather. Confirm
moisture readings of less than 15% prior to application.
Spread Rates
5 - 6m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
