WB NON DRIP SATIN
An environmentally friendly, high quality, high sheen, Pure Acrylic water based enamel with excellent stain resistance and washability. It has excellent flow and levelling properties. It produces a highly washable, chip-resistant finish with non-blocking properties.
Recommended For
INTERIOR and EXTERIOR surfaces.
The product provides a protective barrier against heat and steam and has
good chip and stain resistance. It is ideal for walls, suitably primed
metal, furniture and wood trims (e.g. doors, windows and skirtings).
Not Recommended For
Not suitable for use directly onto gypsum plaster, or for use on floors or
roofs.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be
sound and prepared in the recommended manner. For more information
on surface preparation, contact your nearest Paintsmiths store.
After the correct surface preparation has been completed apply the
necessary primer coat.
Then thoroughly stir and apply a minimum of 2 coats of Paintsmiths WB
Non-Drip Satin to prepared surfaces using a brush, roller or spray at the
stipulated spread rate. Allow to dry before overcoating.
Spread Rates
7 - 9m²/litre/coat
NOTE: The spread rate quoted is approximate and should only be used
as a guide as the actual rate will vary depending on the condition and
porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
