Download Datasheet (PDF)Download Standard Colours Datasheet (PDF)
Midaflow Gloss
A top quality oil-based Alkyd coating, which dries to a gloss finish. Has excellent flow and levelling properties. For suitably prepared interior and exterior surfaces.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used as a finishing coat on suitably primed and undercoated metal, wood and masonry and previously coated surfaces.
Not Recommended For
Should not be applied to new or recently plastered masonry surfaces.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
After the correct surface preparation has been completed apply the necessary primer coat.
Thoroughly stir and apply a minimum of two coats of Midas Midaflow Gloss to prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to dry
before overcoating.
Midas Midaflow Gloss will appear very glossy on application and takes approximately 7 days to reach its final glossy finish.
Spread Rates
±8m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
