Thixo-Glo Satin
A hard wearing, Alkyd-Gelkyd, non-drip enamel that dries to a mar-resistant satin finish. Has excellent flow and levelling properties.
Recommended For
INTERIOR surfaces.
Used as a finishing coat for suitably primed and undercoated wood, metal and masonry surfaces as well as most previously pain ted surfaces.
Not Recommended For
Not really suitable for EXTERIOR use.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface
preparation contact your nearest Paintsmiths store.
Thoroughly stir and apply a minimum of 2 coats of Thixo-Glo Satin to correctly prepared and primed surfaces using a brush, roller or spray at the stipulated
spread rates. Allow to dry before overcoating.
Thixo-Glo Satin will appear glossy on application and takes approximately 7 days to reach its final satin finish.
IMPORTANT: Do not stir before use unless separated. If so, stir well and allow to stand until the gel re -forms.
Spread Rates
±8m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on th e condition and porosity of
the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
