WB Metalprime Grey
An environmentally friendly, high grade water based and anti-corrosive metal primer for cold galvanised surfaces and on suitably prepared mild steel surfaces.
Recommended For
INTERIOR and EXTERIOR surfaces.
For use on new suitably prepared (degreased) mild steel surfaces.
Not Recommended For
Midas WB Metalprime Grey is not a rust converter; surfaces must be cleaned thoroughly and the rust treated prior to application. When priming new galvanized sheeting
it is recommended to use Midas Metal Etch Primer.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Thoroughly stir and apply one coat of Midas WB Metalprime Grey to correctly prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to dry
before overcoating.
Spread Rates
± 8m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
