Universal Undercoat White
A superior quality Alkyd-based intermediate coating that dries to a matt finish. Has good flow and sanding properties and provides an excellent key for finishing coats. Suitable for properly prepared painted surfaces.
Recommended For
INTERIOR and EXTERIOR surfaces.
For use over suitably prepared and primed metal and wood, and previously painted enamel surfaces.
Not Recommended For
Not suitable for use in wet areas and on masonry substrates.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Thoroughly stir and apply one coat of Midas Universal Undercoat to prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to dry before
overcoating.
Lightly sand and wipe before applying the finishing coat.
Spread Rates
± 8m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
