FIBREFLEX W&T
An environmentally friendly, durable and versatile acrylic weatherproofing coating incorporating inert fibres with a slight sheen. Midas Fibreflex does not need to be overcoated.
Recommended For
EXTERIOR surfaces.
Used as a finishing coat for tops of exposed plastered walls, window sills, small ledges and tops of plaster mouldings, as well as exposed weather-facing walls or fairfaced
brick walls.
Not Recommended For
Not suitable for internal walls or areas of high traffic, or under paving or tiles as it will degrade. Not suitable for coating surfaces where there is rising damp.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
As a finish coat for walls (minor plaster crazing):
Thoroughly stir and apply one coat of Midas Masonry Primer to prepared surfaces using a brush or roller at the stipulated spread rates. Allow to dry for
>16 hours before overcoating.
Thoroughly stir and apply two coats of Midas Fibreflex at 5m²/litre using a brush or roller. Allow to dry between coats.
As a weatherproofing coating for walls:
Thoroughly stir and apply one coat of Midas Masonry Primer to prepared surfaces using a brush or roller at the stipulated spread rates. Allow to dry for
>16 hours before overcoating.
Thoroughly stir and apply one thick coat of Midas Fibreflex at 3m²/litre using a brush or roller. Allow to dry and then apply a second coat of Midas Fibreflex at 5m²/litre.
Weatherproofing tops of walls:
Thoroughly stir and apply one coat of Midas Masonry Primer to prepared surfaces using a brush or roller at the stipulated spread rates. Allow to dry for
>16 hours before overcoating.
Thoroughly stir and apply one coat of Midas Fibreflex at 3m²/litre to prepared surfaces using a brush or roller. Always lay off with a brush
Allow to dry for >16 hours before overcoating.
Thoroughly stir and apply two coats of Midas Fibreflex at 5m²/litre using a brush or roller. Allow to dry between coats.
Spread Rates
Finishing coat on walls: 5m²/litre
Weatherproofing: 3m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
