TILESEAL CLEAR
A clear, solvent borne Pure Acrylic that dries to a gloss finish.
Recommended For
INTERIOR and EXTERIOR surfaces.
May be used as a sealer/coating for Terracotta tiles, slasto, brick etc. If only sealing is required, it is recommended that it be ragged on and rubbed in.
The gloss level will increase as additional coats are applied.
Not Recommended For
Slasto externally – will delaminate if exposed to the elements.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface
preparation contact your nearest Paintsmiths store.
Thoroughly stir and apply 2 coats of Tileseal to correctly prepared surfaces using a brush, roller or rag at the stipulated s pread rates. Allow to dry before
applying the second coat.
Spread Rates
±9m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on th e condition and porosity
of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
