MATT SEAL
An environmentally friendly, water-based clear sealer that dries to a matt finish.
Recommended For
INTERIOR surfaces.
Used as a clear sealer over cretestone and rhinolite to enhance washability.
Not Recommended For
Not suitable for exterior use.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Thoroughly stir and apply a minimum of 2 coats of Matt Seal to correctly prepared surfaces using a brush or roller at the stipulated spread rates. Allow to dry before
overcoating.
The application of Matt Seal will slightly darken the colour of the painted surface, so it is advisable to apply a test sample before application to the entire surface.
Spread Rates
±10m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
