FLEXICRYL W&T
An environmentally friendly, Superior quality, high build, low sheen Acrylic emulsion. Has moderate hiding power and excellent flexibility and water resistance.
Recommended For
EXTERIOR surfaces.
Used as a finishing coat on walls where water penetration is a problem.
Can also be used with glass tissue to hide minor surface cracks on walls (should be overcoated with one further coat of Midas Flexicryl).
Not Recommended For
While having excellent water resistance and flexibility, Midas Flexicryl should not be used as a substitute for a waterproofing system such as Midas Midaflex.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
After the correct surface preparation has been completed apply the necessary primer coat.
Then thoroughly stir and apply a minimum of two coats of Midas Flexicryl to prepared surfaces using a brush or roller at the stipulated spread rates. Allow to dry before
overcoating.
Spread Rates
± 5m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Dry Film Thickness
Sheen 20º
Sheen 60º
Sheen 85º
(on glass @ 100 microns WFT after 24 hours)
Surface Dry
Hard Dry
Overcoat
Diluent/Cleaning
Application Temperatures
Storage Temperatures
Shelf Life in unopened containers
VOC rating
Drying Mechanism
Scrubs
Vehicle Type
Pigment Type
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
