DTE SILKOTE
A reasonable quality water-based Acrylic with a sheen finish. Has moderate hiding power, especially in White, and is washable. Some burnishing may occur due to the scrubbing mechanically affecting the surface profile. Used primarily as an economical finishing coat on buildings where cost considerations are paramount.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used on correctly prepared new, or previously painted surfaces. Provides excellent protection in high traffic areas, while also being ideal for
industrial areas to reduce dirt retention.
Not Recommended For
Not suitable for areas where high washability is needed.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information
on surface preparation contact your nearest Paintsmiths store.
Thoroughly stir and apply a minimum of two coats of Earthcote DTE Silkote to prepared surfaces using a Hamiltons 225mm Polypile roller and a
Hamiltons 50mm Utility brush (for cutting in) at the stipulated spread rates. Allow to dry before overcoating.
Spread Rates
±7m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on th e condition and
porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
