Wall Wax Clear
A solvent based, soft wax paste applied to various finishes to enhance the effect.
Recommended For
INTERIOR surfaces.
Used as a finishing coat over Earthcote Worn Leather Paint and Earthcote Pandomo.
Not Recommended For
Not suitable for exterior use, or as a sealer. Do not apply near sources of heat e.g. fireplaces, as it can become soft and dirt retentive when exposed to heat.
Application
PLEASE NOTE: For more information on surface preparation contact your nearest Paintsmiths store.
Apply the first coat of Earthcote Wall Wax to chosen surface with a lint-free mutton cloth. Spread out thinly and evenly and allow to dry for at least 30 minutes before
polishing the entire waxed area by hand or by Orbital buffing machine. Apply a second coat of Earthcote Wall Wax in the same manner.
The more coats of Earthcote Wall Wax applied, the more lustrous and richer the coating will become.
IMPORTANT: Earthcote Pandomo must be sanded with 320 grit water paper before waxing. Earthcote Worn Leather Paint does not require sanding before applying
Earthcote Wall Wax.
Spread Rates
+/- 40m² per 2 litre tin
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
