Earthcote Windswept
A fine glass-beaded paint for outdoor use. Close up, the graded texture has a sandblasted look. Some blooming after UV ageing is a natural consequence of the product.
Recommended For
EXTERIOR surfaces.
Specifically designed as an external wall coating, but it may also be applied inside on both previously painted surfaces or o n unpainted plaster
surfaces.
Bear in mind however that Earthcote Windswept is not a washable coating.
Not Recommended For
Not suitable for bathrooms and showers.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information
on surface preparation contact your nearest Paintsmiths store.
Thoroughly stir and apply one coat of Earthcote DTE Matt, tinted to your chosen colour, using a brush or roller at the stipulated spread rates. Allow
4 hours to dry.
Then apply the first coat of Earthcote Windswept using a Hamiltons Block Brush or a 225mm Polypile roller at the stipulated spread rate. Lay off
with a Hamiltons Renovator or Block Brush. Allow 4 hours to dry.
Apply the second coat in the same manner.
Spread Rates
±4m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on th e condition and
porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
