Satin Sheen
Interior and Exterior good quality Acrylic Emulsion for use as a finishing coat. With excellent durability and low in odour, it offers superior hiding power and with good washability
Recommended For
INTERIOR and EXTERIOR surfaces.
A suitable alkali resisting primer is recommended for application onto new
or old cement plaster, concrete, porous brickwork and various types of
building boards. May also be applied to suitably primed wood, metals,
fibre cement and gypsum plaster.
Not Recommended For
Not suitable for areas of high traffic or humidity, or for areas where
chemical resistance is required.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be
sound and prepared in the recommended manner. For more information
on surface preparation, contact your nearest Paintsmiths store.
After the correct surface preparation has been completed apply the
necessary primer coat.
Then thoroughly stir and apply a minimum of 2 coats of Paintsmiths Satin
Sheen to prepared surfaces using a brush, roller or spray at the
stipulated spread rate. Allow to dry before overcoating.
Spread Rates
± 8m²/litre/coat
NOTE: The spread rate quoted is approximate and should only be used
as a guide as the actual rate will vary depending on the condition and
porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
