PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation contact your nearest Paintsmiths store. Concrete reinforced system Apply one coat of Midas Midacryl PU as supplied, to an area not exceeding one metre by the width of the Polyester fabric used or Chopped Strand Remat and firmly press the fabric into the coating, before the coating begins to dry. Repeat the process in one metre lengths at a time. Allow the application to dry before proceeding. (Drying time is 1 -1½ hours at a standard condition of 25°C and 50% humidity). If the Polyester fabric or Chopped Strand Remat becomes rain saturated, allow to dry out completely over an extended period before proceeding with the application process. Concrete non-reinforced system Apply one coat of suitable primer. Allow to dry thoroughly before proceeding. (Drying time is 1 hour at a standard condition of 25°C and 50% humidity). Bitumen Substrate Apply three coats of Midas Midacryl PU as supplied, allowing time to dry between coats. (Drying time is less than 1 hour at a standard condition of 25°C and 50% humidity).