Midalux 235
An invironmentally friendly, excellent hiding power and scrubability and is suitable for use as a luxurious interior coating or a durable exterior coating. Some burnishing may occur due to the scrubbing mechanically affecting the surface profile.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used as a finishing coat on suitably primed new, or previously painted sand/cement plaster, concrete, fairfaced brickwork and gypsum plaster.
Not Recommended For
Not suitable for use directly onto gypsum plaster, or for use on floors and roofs.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
After the correct surface preparation has been completed apply the necessary primer coat. Then thoroughly stir and apply a minimum of two coats of Midas Midalux 235
to prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to dry before overcoating.
Spread Rates
± 9m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
