Midafelt 225
An environmentally friendly, easy to apply, superior quality Pure Matt Acrylic emulsion that dries to an attractive durable finish. It offers excellent hiding power and scrubability. Some burnishing may occur due to the scrubbing mechanically affecting the surface profile. Interior and exterior use.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used as a finishing coat on suitably primed new, or previously painted sand/cement plaster, concrete, fairfaced brickwork and gypsum plaster. Also suitable for primed
asbestos and fibre cement.
Not Recommended For
Not suitable for areas of high traffic.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
After the correct surface preparation has been completed apply the necessary primer coat.
Then thoroughly stir and apply a minimum of two coats of Midas Midafelt 225 to prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to
dry before overcoating.
Spread Rates
± 8m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
