Midafelt 220
An environmentally friendly, easy to apply, good quality Acrylic Emulsion for use as an interior/exterior finishing coat. With excellent durability and low in odour, it offers superior hiding power and excellent spreadablity. It is easy to clean with good scrubability. Some burnishing may occur due to the scrubbing mechanically affecting the surface profile.
Recommended For
INTERIOR and EXTERIOR surfaces.
Suitable for direct application onto new cement plaster, concrete, porous brickwork and various types of building boards. May also be applied to suitably primed wood,
metals, fibre cement and gypsum plaster.
Not Recommended For
Not suitable for areas of high traffic or humidity, or for areas where chemical resistance is required.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
After the correct surface preparation has been completed apply the necessary primer coat.
Then stir thoroughly and apply a minimum of two coats of Midas Midafelt 220 (White or Tint base) to prepared surfaces using a brush, roller or spray at the stipulated
spread rates. Allow to dry before overcoating.
Spread Rates
± 9m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
