WB Undercoat W&T
An environmentally friendly, top quality Acrylic intermediate coating that dries to a matt finish. Has good flow and sanding properties and provides an excellent key for finishing coats.Interior and exterior surfaces.For use over suitably prepared and primed metal , wood surface and previosly painted surfaces.
Recommended For
INTERIOR and EXTERIOR surfaces.
For use over suitably prepared and primed metal and wood, and previously painted surfaces.
Not Recommended For
Not suitable for use in wet areas and on new masonry substrates.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
After the correct surface preparation has been completed apply the necessary primer coat.
Then thoroughly stir and apply one coat of Midas WB Undercoat to prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to dry before
overcoating. Lightly sand and wipe before applying the finishing coat.
Spread Rates
±8m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
