Metal Etch Primer
A PVB resin based primer which dries to a slight sheen finish having very good adhesion and opacity. Suitable for use on mild steel and galvanized iron. Widely used for painting indoor braais and fireplaces.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used as a primer on ferrous and galvanised metal surfaces. Due to its resin type and acid content, it has excellent adhesion properties to correctly prepared steel. Whilst
overcoating is recommended, it is often used as a primer and finishing coat for metal furniture, railings, braai’s etc.
Not Recommended For
Not suitable on uncleaned galvanized iron.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Thoroughly stir and apply a minimum of 1 coat of Metal Etch Primer to correctly prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow to
dry before overcoating.
Spread Rates
7 - 10m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
