Zinc Phosphate Primer
U.Q.D. Zinc Phosphate is a cost saving Grey metal primer. The primer performance characteristic is its excellent adhesion to clean bare metal.
| Primer
Send us an enquiry and we will get back to as soon as possible.
Non-Slip Walk Safe
Price range: R289.47 through R1,343.64 inc. VAT
Walksafe is a twin pack polyurethane non slip coating suitable for correctly primed Concrete, Screed and Plywood Surfaces where the surface has less than 10% moisture measured with Maxidoser Hygrometer.
- Walksafe is not conducive to floors with a hardness less than 25mpa or over tiles of any sort.
- Walksafe is available in standard Grey and Black but can be overcoated in any colour Unymarine.
- The coverage of walksafe is 1-1,5m2/l and is best applied by airless spray with a 6mm Graco nozzle for even dispersing of 5mm rubber pellets.
Walksafe is not a waterproofing coating but can be used as a non slip coating in showers, ramps and other slippery areas to reduce the risk of falls.
SELECT PRODUCT OPTIONS
Need more info about this product?
Product Description
Other products in this category
Metallic Zinc Rich Primer
Metallic Zinc Rich Primer is a general purpose zinc primer for the temporary protection of suitably prepared steel structures.
| Primer
Epicon T-500
EPICON T-500, a high build type epoxy coating, has excellent physical properties such as adhesion, toughness, abrasion resistance, etc. as well as chemical resistance to salt-water, fresh water, petroleum products, crude oil, alkalis and weak acids.
Epoxy | Marine
Unymarine
Unymarine, based on polyurethane resin, has excellent gloss retention, durability and chemical resistance, etc. Unymarine is recommended as a glossy finish and is suitable for protection of concrete floors. It is suitable for protection of outside of superstructure of steel ships.
Concrete | Marine | Steel
Dekro Tuffcoat
Tuffcoat is a surface tolerant epoxy coating, designed to protect steel with less surface preparation. Tuffcoat requires less surface preparation (St 2) and sandblasting is not necessary. It has excellent adhesion and can be applied to a slightly damp surface.
Concrete | Epoxy | Waterproof
Polyurethane Floor Coat
Polyurethane floor coat is a ready to use quick-drying glossy enamel, designed for application to various substrates, (new and old), and based on a Urethane Alkyd binder. Designed to give a hard-wearing glossy coating over new or previously painted surfaces.
Enamel | Floor
Dekro Alkyd Stoep Enamel
Alkyd Stoep Paint is a ready to use quick drying glossy enamel designed for application to various substrates, (new and old) based on an alkali resisting oleo-resinous binder. Designed to give a hard-wearing glossy coating over new or previously painted surfaces.
Enamel | Floor
Epicon Marine Finish
Epicon Marine Finish, based on a combination of epoxy resin and polyamide curing agent, has high-build excellent durability and adhesion properties. It is suitable system for the external hulls and decks of steel ships, bridges and other steel structures.
Marine | Steel
Dekro Moisture Displacing Epoxy
Dekro Moisture Displacing Epoxy is a low viscosity Hydrophobic Epoxy resin for the coating of concrete floors. Cures under cold, damp conditions, often used as a primer for polyurethane, polyester and epoxy coatings on damp or green concrete.
Concrete | Epoxy | Waterproof
Wash Primer
Commonly referred to as Wash Primer. Main use is over well prepared Galvanised Iron Aluminium, Non-ferrous Metal or PVC.
Cleansing | Plaster | Primer
Acri 700
A finish coat based on acrylic resin which dries by evaporation of the solvents. It has excellent adhesion properties, weathering resistance and gloss and colour retentio. Food grade coating recommended for catering industry and can be applied directly to concrete surfaces.
Concrete | Floor | Food Grade
Polyurethane Floor Coat
A ready to use quick drying glossy enamel, designed for application to various substrates, (new and old), based on an Urethane Alkyd binder. Polyurethane floor coat is hard-wearing and easy to clean, is easy to repaint at any stage of life when re-coating becomes necessary.
Floor | Polyurethane
Hydrolock Primer
Hydrolock Primer is a 2-component water based epoxy. Hydrolock Primer is a rapid curing, water based primer consisting of two components; a pre-reacted epoxy resin dispersed in water (Part A) and a waterborne modified polyamine solution (Part B).
Epoxy | Primer | Waterproof
Dekro Acri700 Primer
ACRI 700 PRIMER is an effective anti-rust primer based on acrylic resin and drying by evaporation of the solvents.
Acrylic | Primer | Steel
Epicon T-800
EPICON T-800, a high-build type phenolic epoxy coating, has excellent physical properties such as adhesion, toughness, abrasion resistance, etc. as well as chemical resistance to salt-water, fresh water, petroleum products, crude oil, alkalis and weak acids.
Epoxy | Marine
Adthane Enamel
Adthane Enamel is a Polyurethane (Twin Pack) coating. Adthane Enamel, because of its outstanding properties, can be applied to a wide variety of substrata – plaster, polyester, wood, metals and plastics after correct priming, where outstanding performance is required.
Concrete | Enamel | Wood