Zinc Phosphate Primer
U.Q.D. Zinc Phosphate is a cost saving Grey metal primer. The primer performance characteristic is its excellent adhesion to clean bare metal.
| Primer
Send us an enquiry and we will get back to as soon as possible.
Adthane Enamel
Price range: R321.54 through R1,631.28 inc. VAT
Adthane Enamel is a Polyurethane (Twin Pack) coating. Adthane Enamel, because of its outstanding properties, can be applied to a wide variety of substrata – plaster, polyester, wood, metals and plastics after correct priming, where outstanding performance is required.
SELECT PRODUCT OPTIONS
Need more info about this product?
Product Description
- Adthane has the following excellent properties – adhesion, flexibility, hardness, gloss retention, non-yellowing and durability.
- It is recommended for the coating of Concrete Surfaces that are suitably primed.
- It is also resistant to detergents, chemicals, solvents, lubricants, organic fuel oil and high-octane fuels.
Other products in this category
Epicon Marine Finish
Epicon Marine Finish, based on a combination of epoxy resin and polyamide curing agent, has high-build excellent durability and adhesion properties. It is suitable system for the external hulls and decks of steel ships, bridges and other steel structures.
Marine | Steel
Uresheen Enamel
High quality, drip-less, silky sheen enamel. Superb appearance, even flow and sheen.
Enamel
Wash Primer
Commonly referred to as Wash Primer. Main use is over well prepared Galvanised Iron Aluminium, Non-ferrous Metal or PVC.
Cleansing | Plaster | Primer
Polyurethane Floor Coat
A ready to use quick drying glossy enamel, designed for application to various substrates, (new and old), based on an Urethane Alkyd binder. Polyurethane floor coat is hard-wearing and easy to clean, is easy to repaint at any stage of life when re-coating becomes necessary.
Floor | Polyurethane
Epicon T-800
EPICON T-800, a high-build type phenolic epoxy coating, has excellent physical properties such as adhesion, toughness, abrasion resistance, etc. as well as chemical resistance to salt-water, fresh water, petroleum products, crude oil, alkalis and weak acids.
Epoxy | Marine
Eggshell Enamel
High quality Eggshell Enamel for interior use. Superb appearance with a uniform eggshell gloss, good build and opacity.
Enamel
Dekro Moisture Displacing Epoxy
Dekro Moisture Displacing Epoxy is a low viscosity Hydrophobic Epoxy resin for the coating of concrete floors. Cures under cold, damp conditions, often used as a primer for polyurethane, polyester and epoxy coatings on damp or green concrete.
Concrete | Epoxy | Waterproof
Bituminous Paint
General purpose protective coating Impervious to moisture and most chemicals. Low cost, high solid content. Acceptable glossy appearance.
Bituminous | Waterproof
Dekro Acri700 Primer
ACRI 700 PRIMER is an effective anti-rust primer based on acrylic resin and drying by evaporation of the solvents.
Acrylic | Primer | Steel
High Gloss Enamel
Economical enamel for interior and exterior use. Good appearance with a high gloss. Reasonable durability and gloss retention. Especially formulated for the paint contractor.
Enamel | Wood
Standard Aluminium
Ready mixed leafing aluminium paint. General purpose high lustre aluminium. Protective coating for iron, steel, wood and other surfaces. Improves illumination. Reflects heat.
Hydrobond 44
Hydrobond 44 is a water based anti-corrosive and rust-inhibiting coating. It provides excellent protection for iron and other metal surfaces in corrosive-industrial environments. It also assists in inhibiting or preventing corrosion, under rusting and rust-creep and is easily applied onto inaccessible areas, where maximum preparation is not possible.
Primer | Waterproof
Dekro Spar Varnish
Dekro Spar Varnish is a general-purpose glossy, durable coating that protects woodwork in preference to polishing or oiling.
Gloss | Sealer | Varnish | Wood
Dekro Polyurethane Varnish
Single Pack Polyurethane Varnish, which is supplied in Gloss, Eggshell or Matt finish.
Sealer | Varnish | Wood
Non Drip Enamel
Dekro Non Drip Enamel is a non-yellowing water based interior/exterior enamel which is highly durable and washable which dries to an attractive low sheen (satin) finish.
Antifungal | Eco-friendly | | Wood
Non-Slip Walk Safe
Walksafe is a twin pack polyurethane non slip coating suitable for correctly primed Concrete, Screed and Plywood Surfaces where the surface has less than 10% moisture measured with Maxidoser Hygrometer. Walksafe is not conducive to floors with a hardness less than 25mpa or over tiles of any sort. Walksafe is available in standard Grey and Black but can be overcoated in any colour Unymarine. The coverage of walksafe is 1-1,5m2/l and is best applied by airless spray with a 6mm Graco nozzle for even dispersing of 5mm rubber pellets. Walksafe is not a waterproofing coating but can be used as a non slip coating in showers, ramps and other slippery areas to reduce the risk of falls.
Floor | Polyurethane
Hydrolock Primer
Hydrolock Primer is a 2-component water based epoxy. Hydrolock Primer is a rapid curing, water based primer consisting of two components; a pre-reacted epoxy resin dispersed in water (Part A) and a waterborne modified polyamine solution (Part B).
Epoxy | Primer | Waterproof
Dekro Timbertek
Timbertek is a single pack siliconised permeable varnish, dries to a semi gloss, flexible coating.
Sealer | Varnish | Wood
Road Marking Traffic Paint
Dekro Road Traffic Paint is a quick drying modified alkyd resin paint with excellent durability. It has had excellent day and night visibility and is a proven performance with municipalities and provicial authoities with the required SABS certification.
Road