WB WOOD TREATMENT C&T
An environmentally friendly, quick drying, water based wood treatment with a satin finish. It gives wood vitality without concealing the grain.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used on new and previously coated wood. Can also be used on interior wood.
NOTE: For exterior surfaces, Midas WB Wood Treatment must be tinted.
Not Recommended For
Not suitable for use on hard, oily woods like Kerry Gum and Balau.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Thoroughly stir and apply one primer coat Midas WB Wood Treatment, diluted by 5 -10% using water. Apply evenly using a brush in the direction of the grain. Allow to
dry before overcoating.
Then apply two finishing coats of Midas WB Wood Treatment to the prepared surfaces, in the direction of the grain, using a brush at the stipulated spread rates. Allow to
dry before overcoating.
NOTE: At least three coats should be applied to raw timber in order to achieve an even and durable finish. Sand lightly between coats.
Spread Rates
±8m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
