FUNGICIDAL WASH
A ready for use broad-spectrum, general-purpose biocide for the sterilising of surfaces prior to painting. Has a blue tint to assist with application and prevent missing any spots during the sterilising process. Leave to dry and overcoat. 1st coat – 24hrs reaction time, 2nd coat – leave to dry
Recommended For
INTERIOR and EXTERIOR surfaces.
An extremely efficient surface sterilant prior to painting. Will eliminate most common species of bacteria, moulds and algae.
Not Recommended For
Not suitable for use in wine cellars.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Supplied ready for use – do not dilute.
Apply Fungicidal Wash liberally by brush, roller or hand spray depending on size area to be treated. Allow the active ingredient a minimum kill period of 18 - 24 hours to
penetrate the substrate and kill spores. Scrub the surface with a mild soap and water solution to remove all dead spores and any other contaminants or discolouration.
Rinse well and allow to dry. Then apply a second coat of Fungicidal Wash and allow to dry.
Spread Rates
6 - 9m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
