DTE Matt -1 W&P
A premium quality, water-based washable Acrylic which dries to an ultra matt finish. Some burnishing may occur due to the scrubbing mechanically affecting the surface profile.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used on correctly prepared new, or previously painted surfaces.
Not Recommended For
Not suitable for use on ceilings, timber work, kitchen cupboards and in bathrooms.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on
surface preparation contact your nearest Paintsmiths store.
After the correct surface preparations has been completed, apply the necessary primer coat.
Thoroughly stir and apply a minimum of two coats of Earthcote DTE Matt to prepared surfaces using a Hamiltons 225mm Polypile roller and a
Hamiltons 50mm Utility brush (for cutting in) at the stipulated spread rates. Allow to dry before overcoating.
Spread Rates
±9m²/litre
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on th e condition and
porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
