Timber Preservative C&T
A breakthrough wood food that pumps life into wood, almost like a beauty treatment for wood. Deep penetrating, it nourishes, protects and preserves. Enriched with wax to shake off water, Midas Timber Preservative gives a healthy, natural gleam to timber. It is technologically designed to look after wood that has to face up to the elements.
Recommended For
EXTERIOR surfaces.
For use on new and previously oiled exterior wood surfaces, especially hard
woods. Also suitable as a decorative treatment on fences and Wendy houses
etc.
IMPORTANT: This product must always be used tinted and not as a clear coating.
Not Recommended For
Not suitable for INTERIOR woodwork as it never dries
completely. Do not use on damp or wet timber.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended
manner. For more information on surface preparation contact your closest store.
Thoroughly stir and apply 2/3 coats of Timber Preservative to the prepared surfaces using a brush at the stipulated spread rates. Allow to dry
before over-coating.
Note: No need to dilute. Sand lightly between coats.
Spread Rates
± 8 m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and
porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
