STANDARD ALUMINIUM
A blend of Hydrocarbon and Alkyd resins, solvents and Leafing Aluminium paste that dries to a silver satin finish.
Recommended For
EXTERIOR surfaces.
Used as a finishing coat on fencing posts, telephone poles, metal gates and roof sheets.
Not Recommended For
Not suitable for use on bituminous surfaces or high traffic areas.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
Thoroughly stir and apply a minimum of 2 coats of Standard Aluminium to correctly prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow
to dry before overcoating. This product needs to be stirred well before use because of its low viscosity.
Spread Rates
8 - 10m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
