MIDAMAX 190 WHITE
An environmentally friendly, easy to apply, good quality Matt Acrylic emulsion for use as an interior primer or finishing coat. Suitable for interior and exterior use. It has been formulated with an optimum blend of acrylic resins, precisely graded fillers and fade resistant pigments. It offers excellent hiding power and has good grain filling properties. Some burnishing may occur due to the scrubbing mechanically affecting the surface profile.
Recommended For
INTERIOR and EXTERIOR surfaces.
Used as interior primer for new or previously painted sand/cement plaster, concrete, fairfaced brickwork, gypsum boards (suitably primed when new) and building boards.
Also used as an economical finishing coat for interiors and ceilings, as well as fibre cement.
Not Recommended For
Not suitable for areas of high traffic or humidity.
Not suitable for exterior finishing coats.
Application
PLEASE NOTE: Correct preparation is essential. All surfaces must be sound and prepared in the recommended manner. For more information on surface preparation
contact your nearest Paintsmiths store.
After the correct surface preparation has been completed apply the necessary primer coat.
Then thoroughly stir and apply a minimum of two coats Midas Midamax 190 White to prepared surfaces using a brush, roller or spray at the stipulated spread rates. Allow
to dry before overcoating.
Spread Rates
±8m²/litre/coat
NOTE: The spread rates quoted are approximate and should only be used as a guide as the actual rate will vary depending on the condition and porosity of the substrate.
Enquire about this product.
Send us an enquiry and we will contact you as soon as possible.
